Page 5 of 11 FirstFirst 1234567891011 LastLast
Results 41 to 50 of 107

Thread: ROLLS-ROYCE CRECY

  1. #41
    Join Date
    Feb 2004
    Location
    Mtn. View, Calif.
    Posts
    2,111

    Default Re: ROLLS-ROYCE CRECY

    If you like unique powerplants, vehicles and other unusual machines, then you'll LOVE this site. There's even a 'vibratory' steam engine that resembles that 'half-rotate' engine in your animation:

    The Museum Of Retro-Technology
    http://www.douglas-self.com/MUSEUM/museum.htm


    Last edited by AirDOGGe; 02-17-2011 at 06:37 PM.

  2. #42

    Default Re: ROLLS-ROYCE CRECY

    Quote Originally Posted by AirDOGGe View Post
    If you like unique powerplants, vehicles and other unusual machines, then you'll LOVE this site. There's even a 'vibratory' steam engine that resembles that 'half-rotate' engine in your animation:

    The Museum Of Retro-Technology
    http://www.douglas-self.com/MUSEUM/museum.htm


    Thanks for the link. Good place. Each inventor must know the story well.

    "Twin Feliks"




    Big air cooled



    Small air cooled






    And "Stephenson second"






    And story this inventions "step by step"
    Story half rotate engine

    Save these PDF files on your computer and print. These are drawings of the 2-liter engine on a scale of 1: 1


    http://www.new4stroke.com/section.pdf

    http://www.new4stroke.com/long.pdf

    No coments.....


    Regards Andrew

  3. #43

    Default Re: ROLLS-ROYCE CRECY

    he wind energy. Harrier is driven by the wind, the helicopter also...In order to receive a flow venturi nozzle which is in the engine Harier ( 200 KG / sec ), then you need only 6 meters in diameter and 25 length.... and 5 m / sec wind...






    With the movement of 200 Kg / sec Harrier has a string of 10 000 KG....




    Another way to go. The narrowest point is less Venturiego nozzle pressure. It's like found in the center of the lowlands of atmospheric ( weather ). This causes larger than hurricanes weather.
    Except that here we have a much shorter way from the boom to the lowlands....
    Huricane flows from areas of high pressure to areas of low pressure.


    Andrew

  4. #44

    Default Re: ROLLS-ROYCE CRECY

    The Underground Windmill.

    Underground windmills will be an really new alternative to the Atom



    Regards Andrew

  5. #45

    Default Re: ROLLS-ROYCE CRECY

    "The Non-Undergroud Windmill"







    This is Homer. Now you can safely drink, because he knows the underground fan will give him a lot cheaper green energy.
    It can use an underground windmill used an old engine, for example, the Harrier. Or the same fan.



    Regards Andrew

  6. #46

    Default Re: ROLLS-ROYCE CRECY

    What would this solve better than the normal windmill ?

  7. #47

    Default Re: ROLLS-ROYCE CRECY

    Quote Originally Posted by Juke View Post
    What would this solve better than the normal windmill ?
    "The gain in kinetic energy resulting from the increased linear velocity in the throat is offset (i.e., balanced) by the decrease of pressure in the throat. The reduction in pressure which occurs when the fluid flows through the throat is called the Venturi effect and is named after the Italian physicist Giovanni Battista Venturi (1746 - 1822) who first observed the effect."

    http://en.citizendium.org/wiki/Venturi_effect
    http://www.hippocampus.org/homework-help/P...Simulation.html



    Animation showing how using venturi nozzle drives the gyroscope to the flight instruments. Historically, the aircraft was not an electric current...
    But now, if we do the jets in the right size, we thus also powered electric generator...






    Even used a double Venturi nozzle, in order to increase the vacuum to best drive "turbine"



    Andrew
    Last edited by Feliks; 05-27-2011 at 12:53 PM.

  8. #48

    Default Re: ROLLS-ROYCE CRECY

    Lesson Two: in terms of fundamental historical

    Venturitubes 1937.pdf

    On the pictures below you can see how small the venturi nozzle is to drive the gyroscopes in the strands. My finger and applied on the next hand, illustrate the size of the venturi tube. It is almost equal to the diameter of my finger. Now, please imagine how much energy to give the fan with the same diameter of my finger...








    Since the narrowest point of the venturi tube, we can easily get up to 10 times higher air velocity, we can mount the engine behind the jet frame, which at high speeds the inlet has a good performance.
    For example, you can mount an engine on an Tourist Plane, which reaches 200 km / h at the entrance to the RAM JET would be about 2000 km / h....
    This will generate additional good sequence, using a very simple engine ( or two )




    Regards Andrew

  9. #49

    Default Re: ROLLS-ROYCE CRECY

    Originally posted by Feliks


    On the pictures below you can see how small the venturi nozzle is to drive the gyroscopes in the strands. My finger and applied on the next hand, illustrate the size of the venturi tube. It is almost equal to the diameter of my finger. Now, please imagine how much energy to give the fan with the same diameter of my finger...


    Regards Andrew
    A venturi tube so small as my finger is able to propel a large heavy rotating disk gyroscope air to 10 000 RPM, and even walk through the air filter....





    Since the gyroscope can be power, relatively high compared to the diameter of the venturi tubes (1 ") and he has the 2 ", then maybe you can do in F1 KERS Venturi "?
    The air sucked into the engine can be sucked through a venturi tube so, resulting in a negative pressure to drive the gyroscope, which will keep energy....:tsk

    That would be something like a turbine gives energy, but the intake pipe. Turbo



    Regards Andrew

  10. #50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •