Announcement

Collapse
No announcement yet.

Twin Fuselage Racer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Twin Fuselage Racer

    This is an idea that I've been developing over several years. The idea is to create a modernized unlimited reno racer version of a P-82/F-82 twin fuselage style aircraft.

    * Counter-rotating props are used with super-critical airfoil tips. Super-critical airfoils are also used in the wing and fore-plane. Shockbodies are used on the wings to manage transonic shockwave formation
    * The fore-plane has slightly higher AOA and is located ahead of the center of gravity (this layout provides natural stall recovery as the foreplane will stall first - allowing the main wing, which is behind the center of gravity, to naturally pitch the nose down).
    * The fore-plane also contains elevator controls to assist in pointing the nose. The idea here is to increase hard-turn efficiency (by lifting the nose INTO the turn rather than only pulling the tail away as in a conventional layout - the Europeans use this technique on their fighters (Rafael, Typhoon & Grippin)). In other words, this aircraft is optimized for turn performance as opposed to straight line performance.
    * A boom in-between the two fuselages houses the nose gear - this aircraft has a tricycle landing gear for improved ground handling.
    * Area-ruling has been kept in mid with regard to the placement of the cockpit, radiator scoop, wings etc (something that was unknown during WW2).
    * The port fuselage contains the cockpit, while the starboard fuselage housing an enlarged radiator scoop to handle cooling requirements of both engines - the aircraft can be taxied using the starboard engine only to save fuel.
    * Current testing using X-Plane (using two 3,000 hp merlin V-12s) predicts a top straight line speed of around 520mph, and a sustained 3G turn speed of around 480mph.
    * Virtual testing is still ongoing. Additional stall testing, and aircraft handling test need to be completed...
    Attached Files

  • #2
    Re: Twin Fuselage Racer

    Hello Carl,
    this looks really impressive! Enthusiastic man like Paul Allen or so should realize it...

    Maybe alternative with twin boil-off cooled R-3350 ?

    Gibbs

    Comment


    • #3
      Re: Twin Fuselage Racer

      Well thought out and very fast looking. Let me win the lotto and Ill get back with you!!
      Bear..... and now Ghost Fever Forever...... John

      Comment


      • #4
        Re: Twin Fuselage Racer

        That's likely the minimum intersection drag you can get for a twin boom plane.

        Comment


        • #5
          Re: Twin Fuselage Racer

          520 MPH wow.

          Comment


          • #6
            Re: Twin Fuselage Racer

            Cool plane!

            Any notes on the types of stresses you'll be expecting in the sections connecting the two bodies?
            I don't know any numbers but I guess you are trading off the drag of having a center wing section for the weight of beefier spars in the canard and tail?

            Anywho, looks like fun
            "young" Thomas

            http://teamonemoment.com/

            Comment

            Working...
            X