PDA

View Full Version : Twin Fuselage Racer



CarlKinder
03-11-2017, 06:29 PM
This is an idea that I've been developing over several years. The idea is to create a modernized unlimited reno racer version of a P-82/F-82 twin fuselage style aircraft.

* Counter-rotating props are used with super-critical airfoil tips. Super-critical airfoils are also used in the wing and fore-plane. Shockbodies are used on the wings to manage transonic shockwave formation
* The fore-plane has slightly higher AOA and is located ahead of the center of gravity (this layout provides natural stall recovery as the foreplane will stall first - allowing the main wing, which is behind the center of gravity, to naturally pitch the nose down).
* The fore-plane also contains elevator controls to assist in pointing the nose. The idea here is to increase hard-turn efficiency (by lifting the nose INTO the turn rather than only pulling the tail away as in a conventional layout - the Europeans use this technique on their fighters (Rafael, Typhoon & Grippin)). In other words, this aircraft is optimized for turn performance as opposed to straight line performance.
* A boom in-between the two fuselages houses the nose gear - this aircraft has a tricycle landing gear for improved ground handling.
* Area-ruling has been kept in mid with regard to the placement of the cockpit, radiator scoop, wings etc (something that was unknown during WW2).
* The port fuselage contains the cockpit, while the starboard fuselage housing an enlarged radiator scoop to handle cooling requirements of both engines - the aircraft can be taxied using the starboard engine only to save fuel.
* Current testing using X-Plane (using two 3,000 hp merlin V-12s) predicts a top straight line speed of around 520mph, and a sustained 3G turn speed of around 480mph.
* Virtual testing is still ongoing. Additional stall testing, and aircraft handling test need to be completed...

Gibbs
03-27-2017, 02:09 AM
Hello Carl,
this looks really impressive! Enthusiastic man like Paul Allen or so should realize it... :cool::cool::cool:

Maybe alternative with twin boil-off cooled R-3350 ?

Gibbs

RarebearFan77
06-08-2017, 08:26 PM
Well thought out and very fast looking. Let me win the lotto and Ill get back with you!!

IcePaq
06-21-2017, 04:39 PM
That's likely the minimum intersection drag you can get for a twin boom plane.

Cassady
11-13-2017, 10:52 AM
520 MPH wow.

CubersWrist
01-02-2018, 02:25 PM
Cool plane!

Any notes on the types of stresses you'll be expecting in the sections connecting the two bodies?
I don't know any numbers but I guess you are trading off the drag of having a center wing section for the weight of beefier spars in the canard and tail?

Anywho, looks like fun :thumbsup: